GMC Airbag Module Resets

Order Reset Service for Your GMC Airbag Control Module

How it Works       Find Your Part

Get Your Airbag Module Reset or Repaired After an Accident

Following an accident or some other type of impact like hitting a curb or pothole, you may notice that your airbag light on your dash has turned on. What that usually means is that it’s time to reset your airbag control module. Dealerships may tell you that this means you must get your module replaced, but actually, in almost all situations, the programming and crash data on the unit can actually be erased, the device can be reprogrammed, and the car part can be used again. Recycling a triggered airbag module is both economically and environmentally friendly. If your GMC vehicle has a light on and you want to avoid the hefty bill of a few hundred dollars for a new part and install from a dealership, consider simply getting airbag module reset services with MyAirbag to save money and prevent wasteful, unnecessary replacement practices.

MyAirbags is able to reset and repair your GMC airbag modules for you with specialized tools, ensuring that your airbag control module is clear of crash data and ready to go. Find your module today!

MyAirbags Offers: 

  • 100% money-back guarantee

  • Fast turnaround

  • Custom repairs, as needed

  • Affordable prices

GMC Airbag Module Resets: Like New, Only Better

Has your GMC been in an accident? Then you may need to have your airbag control module reset back to its original factory condition. When you get your airbag module reset with MyAirbag, you get your module back within 24 hours and can expect the installation to be simple, fast, and reliable.

Though in rare cases there may be hardware issues or a need to reprogram the module and your SAS unit (Sophisticated Airbag Sensor) nodule may need calibration or programming after it is put back in the vehicle, this is rarely the case. MyAirbags service is 100% satisfaction guaranteed or your money back. If you want to save money on your airbag reset, place your order with MyAirbags today!

Reset Your Airbag Module and Save!

Resetting your airbag module is hundreds of dollars cheaper than getting it replaced, and doing so also helps you avoid the need to get VIN coded at a dealership with a replacement part. All you have to do is:

  1. Select the Make, Model, and Year to find your part (if you can’t find it, we also do custom repairs)

  2. Place your order

  3. Mail us your part(s), after safely removing it from your vehicle

  4. After your part(s) arrive, we run diagnostic tests to identify any problems

  5. We reset or rebuilt it, then send it back to you within 24 hours

  6. Plug it back into your vehicle and you’re likely good to go!

  7. Contact us if you have any questions along the way

Start Your Order Today!

Most Popular GMC Airbag Modules Reset Service

If your GMC vehicle has the seatbelt light on, it’s most likely time for an airbag module reset! Some of the most popular airbag module resets we sell for GMCs are:

Other Names for Airbag Control Modules: 

Your dealership or manual may refer to airbag control modules by another name. Common names used to refer to this part are:

  • Airbag Module

  • Supplementary Restraint System (SRS) Module

  • Airbag ECU (Electronic Crash Unit)

  • Airbag Control Module (ACM)

  • Restraint Control Module (RCM)

  • Sensing Diagnostic Module (SDM)

  • SRS Control Module (SRSCM)

  • Occupant Restraint Controller (ORC)

  • SAS Unit (Sophisticated Airbag Sensor) Module

  • Event Data Recorder (EDR)

Whatever you call the part, if it’s causing you some issues due to a crash, or has been triggered by potholes or a curb check, it can be reset by sending it in to MyAirbags. Get started today...

The Benefits of Airbag Module Resets with MyAirbags

  • Fast — After you send us your part, the MyAirbags team resets your part and sends it back to you pronto, so you can get back on the road ASAP!

  • Effective — Having serviced more than 1 million parts over a period of many years, we are confident that we can reset the SDM for your GMC and get it back in perfect working order.

  • Affordable — Using our repair-and-return service can save you hundreds compared to the price of buying new or used.

  • Guaranteed — With more than 150,000 happy customers and growing, MyAirbags continues to offer a guaranteed SMD repair and reset service. If you aren’t 100% satisfied with how your module is working when you receive back, you get your money back!

  • Eco-friendly — Recycling your unit doesn’t just save you money, it also helps reduce your carbon footprint.

Get Started Today

Ready to Get Your GMC’s Airbag Module Reset?

While a typical airbag module replacement might cost you three figures, for just $49, we can reset all the fault codes for your airbag module! No need to take it into the dealership for extra programming, our services are simple, fast, and complete. Though some dealerships may say otherwise, all airbag control modules can be reprogrammed and reset, unless they have suffered permanent damage by something like a fire or serious water damage. Airbag control modules store all the hard and soft codes caused by an accident. If your airbag light is on after even just a small impact, send your airbag module to MyAirbags to get the light to turn off by getting the crash codes reset today! If you have any questions, feel free to contact us any time and we will be happy to help!

Ready to save money and get your GMC airbag module working like new again?

Start Saving Today!