This is a repair and return service for Seat Belt Latch End Receiver. When you receive your rebuilt part back from us it will be plug-n-play and not need any additional programming. All you need to do is send your part to us. Then after receiving the part back from us, just reinstall it and you’re back in business!
Is your Airbag Light on? If you answered, "Yes," on any of these questions, youll benefit from our repair service!
MyAirbags provides professional seat belt repair services for all of your seat belt needs. For example, we rebuild all types of seat belt tensioners that are locked or blown after an accident. Additionally, we also replace the webbing on ripped, torn, cut and/or dog-chewed seat belts. In fact, our seat belt repair services cover every type of seat belt: single-stage, dual-stage and triple-stage seat belts. We always have required parts in stock. To summarize, our Seat Belt and Buckle Repair Services is the best alternative to expensive part replacements at the dealership where, for a fraction of the price, we repair your seat belt instead. As a result, you can stop buying used or new seat belts and send your original seat belts to us and we will restore your bad, damaged or locked seat belts to their original factory condition. Most importantly, we use OEM parts, meeting or exceeding the manufacturer specifications and send it back to you. This is a 1 working day repair and our services are guaranteed 100% or we refund your money back. Order today and save!
A pretensioner is a device connected to the safety belt buckle, safety belt retractor and/or outboard lower safety belt anchor assembly. Another key point is that a properly working pretensioner is a combination of the following:
Furthermore, pretensioners activate as a result of certain accidents or crashes, such as:
Surprisingly, pretensioner activation can also depend upon the type of vehicle involved in the crash. Oddly enough, some vehicle pretensioners deploy even if the safety belt is buckled. All pretensions types have the following three pieces:
The buckle pretensioner uses a pyrotechnic gas generator that propels the piston. After it activates, the safety belt buckle has a cable that pulls the buckle down toward the seat, thereby tightening and locking the belt. The anchor pretensioner uses a pyrotechnic gas generator that propels the piston. After it activates, the outboard lower safety belt anchor assemblys cable pulls the buckle down toward the floor, thereby tightening and locking the belt. The retractor pretensioner uses a pyrotechnic gas generator device. This pyrotechnic gas generator "backwinds" the retractor spool thereby tightening and locking the belt. Use the same precautions used for any other SRS Inflatable Restraint Components. Like other SRS Inflatable Restraint Components, Pretensioners can contain an electronic charge for a short time. Even after the battery is disconnected or the ignition is turned off, the Pretensioner has the risk of causing an electric shock. 
Our Seat Belt Buckle Receiving End (Non-Hazmat) Service is designed to address and resolve common issues with the seat belt receiving end of your vehicle. This service ensures that your seat belt buckle functions properly, enhancing your safety and meeting regulatory compliance.
Dont let a faulty buckle compromise your safety on the road. Send us your part today, and let our expert technicians restore it to working condition.
A full diagnostic check should first be performed to eliminate all other possible causes for your symptoms, even if the symptoms match those specified on the common fault description.
If you send a good working unit because of misdiagnosis and after we test the unit and find no issue/faults, then you will only be responsible for return shipping.
IMPORTANT! If you are not sure that this part is the cause of the fault then we recommend that you do not go ahead with this purchase and instead seek further professional advice and diagnosis.If your vehicle was in an accident/collision and now your seat belts are locked and your airbag light on. You will need to check all your seat belts at the front seats and the rear seats to see if they are locked, stuck, loose or do not retract. If they are then they will need to be replaced or rebuilt. We do rebuild seat belts and airbag computer module that controls airbags and seat belts will need to be reset. We can reset your airbag module Click here for more info on what needs to done after an accident.
Our service is 100% guaranteed or money back.
Depending on the make and model of your vehicle, instructions for how to remove seat belt may slightly vary. Below, you'll find directions for removing seat belt pretensioner. Send your seat belt to us, if your seat belt retractor is locked, ripped, frayed, cut, torn or stopped working.
Most seat belts year 1998 and newer are considered Class 9 Hazmat Dangerous Goods and need to be shipped by ground (parts contain explosive pyro sensor and need to ship via Hazmat Dangerous Goods). Someone of age 18+ will need to be present to sign for the package after we ship it back. This is Federal Regulations and signature is required upon delivery. Package will not be delivered without signature of someone of age 18+
Warranty covers the repair of the part for one full year.
If the repair fails within a year, we will repair the part again. In the rare occasion that the item is not repairable, we will either replace the circuit board entirely or refund the cost of the repair, at our discretion.
This warranty is non-transferable and applies to the original purchaser only.
